PCE Instruments PST 1 X Bedienungsanleitung Seite 35

6.1.3 Measurement/recording screen
There are two ways to access the recording screen. In the Mode menu, you can choose between
manual and automatic mode.
In manual mode, you can switch to the recording screen by pressing OK. If the measured value
then exceeds the limit value, the device starts recording.
In automatic mode, the device automatically switches to this screen and starts recording as soon
as the limit value is exceeded.
During recording, the screen displays the measurement parameters and the current measured
value. Three different representations are possible, which can be selected using the arrow keys.
Summarised representation Statistical representation
Graphical representation
The recording is displayed by an icon on the screen.
© PCE Instruments
32