PCE Instruments PST 1 X Bedienungsanleitung Seite 33

5.3.7 Factory settings
All settings made under the Settings menu item can be reset to the factory settings here.
5.4 Calibration
The Calibration menu allows you to set the sensitivity of the internal load cell, which can be
determined by calibration. As a special measurement setup is required for calibration, this menu
is protected by a code.
Please send the device to PCE Instruments for calibration. You will find our contact details at the
end of this manual.
5.5 Manual
A QR code is displayed in this menu. The QR code can be scanned with a mobile phone, for
example, and leads directly to this user manual.
5.6 Info
The model name, serial number and firmware version are displayed in the Info menu.
© PCE Instruments
30