ULTIMATE SPEED UPK 10 D1 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung Seite 18

Using the device
compressed air hose
as possible.
Safety fuse
If the device becomes overloaded or
malfunctions, the safety fuse triggers
to protect the device.
Never use a fuse with a
higher release current
strength. There is a risk
of fire!
Attention: To protect people and
property, an overheat protection cir-
cuit has been installed for the battery
in the power bank with compressor
. This prevents an overheating of
1
the battery installed in the device
and automatically switches off the
power bank with compressor
battery temperature is too high. If this
happens, allow the device to cool
down prior to re-commissioning it.
z Switch on lighting
Light mode
To switch on the LED light
„
press the power bank switch
for 3 seconds.
Press the power bank switch
„
for another 3 seconds in order to
switch the LED light
Flash mode
To switch on the LED light
„
the flash or SOS mode, first press
18 GB
as quickly
17
if the
1
,
7
9
9
back off.
7
in
7
the power bank switch
3 seconds. Then the LED light
will be permanently lit.
Briefly press the power bank
„
switch once again and the LED
9
light will switch to flash mode.
7
Briefly press the power bank
„
switch once again and the LED
9
light will switch to SOS mode.
7
There will be 3 short flashes,
3 long flashes and another
3 short flashes.
Briefly press the power bank
„
switch once again to switch
9
off the LED light
Caution! Do not look
directly at the LED lights
this can damage your eyes.
Note: It is not possible to turn on
the light while the power bank with
compressor is charging.
1
z Using the jumpstart
feature
When using the jumpstart, make
„
sure that at least 3 indicator
lights are permanently illumi-
13
nated.
1
B
for
9
7
.
7
as
7
A
2. 1.