This helps prevent device
damage and possible
personal injuries that
could result from it:
Working with the device:
Do not use the device while
driving the vehicle.
Before setup or first use,
check the device for any dam-
age and do not use unless in
perfect working order.
Do not expose the device
to rain or wet weather. Do
not let the device come into
contact with water. Do not
immerse the device in water.
There is a risk of electric
shock!
Keep all openings of the
device free during operation.
Do not block the openings
with your hands or fingers,
and do not cover the device.
There is a risk of overheating!
In hot weather, do not leave
the device in a car. This could
permanently damage the
device.
The device becomes warm
during use. There is a risk of
burn injuries from touching
the hot surfaces.
Take care to ensure that sand,
dust and other small foreign
objects cannot enter the air
inlet or air outlet openings.
Do not operate the device
near to flammable liquids or
gases. Do not use the device
to draw in hot fumes. Failure
to do so risks causing a fire
or explosion!
Switch the device off and
remove the mains plug from
the socket in the following
cases:
When you are not using
–
the device;
If you are leaving the
–
device unsupervised;
If you are doing cleaning
–
work;
If the connection cable is
–
damaged;
If foreign objects have
–
got into the device or you
notice unusual noises.
Only use the accessories
supplied and recommended
by the manufacturer.
Do not dismantle or modify
the power bank with
compressor. This device
must only be repaired by a
maintenance technician.
Do not use the device in
areas with a risk of explo-
sion, e.g. near flammable
liquids, gases or powders.
Safety instructions
GB
11