Ruris RXR800 Bedienungsanleitung Seite 28

EN
1. The outlet must be installed near the equipment and must be easily accessible.
2. The external cable of this unit cannot be replaced; if the cable is damaged, the unit must be completely
replaced.
4. Do not open the charger case. For safety reasons, only qualified service personnel are allowed to open any
equipment.
5. Protect the equipment from moisture.
6. Disconnect the equipment from the power source before cleaning. Use a damp cloth.
7. The equipment must be placed on a stable surface.
8. If the charger is not used for a long period of time, disconnect it from the power source.
9. If one of the following situations occurs, the equipment must be checked by qualified service personnel:
- The plug is damaged.
- Liquid has entered the equipment.
- The charger has been exposed to moisture.
- The charger has been dropped and/or is damaged.
- The charger shows obvious signs of breakage.
- The charger is not working well or you cannot make it work according to this manual.
10. Do not connect a damaged power cord to the power source. Do not touch a damaged power cord while it
is connected to the power source.
Special safety instructions for battery powered devices:
1. Make sure the robot is turned off before inserting the rechargeable battery. Inserting a battery into a power
tool that is switched on can lead to accidents.
2. Unplug the charger before cleaning.
3. Do not expose the battery to direct sunlight for long periods of time or place it on a radiator. Heat damages
the battery and there is a risk of explosion. If the battery is warm, allow it to cool before charging. Do not open
the battery and avoid mechanical damage to it.
2.3. THE SAFETY FEATURES OF THE ROBOT
1.Anti -theft/disabling device
The device's anti-theft/disable feature will prevent anyone from using the robot unless they have the code. You
will be prompted to enter a four-digit code of your choice to use as your personal security code.
3. Lift sensor
If the robotic lawnmower is lifted off the ground, the blade will stop rotating.
4. Tilt sensor
If the robotic lawnmower is tilted, the blade will stop immediately.
5. Obstacle sensor
The robotic lawnmower detects obstacles in its path during operation. If the robotic lawnmower collides with an
obstacle, it will stop and turn in another direction.
6. Rain sensor
The robotic lawnmower has a rain sensor and it will stop working.
7. Emergency stop button
Pressing the STOP button will stop the robot and the blade immediately.
8. Sealed battery
The battery that powers the robot is completely sealed.
9. Base station and boundary wire
The robot cannot operate without a perimeter cable installed and activated through the base station. If the cable
is not connected correctly or is damaged, the robot will stop working.
2.4. PROTECTION AGAINST TRANSECTS
Do not place the charging station under tall trees.
During lightning strikes, unplug the charging station and disconnect the boundary wire if possible.
Important:
Do not use the robot in adverse weather conditions (rain, lightning).
4