LD Systems AMP 205 AV Bedienungsanleitung Seite 8

PACKAGING CONTENT
Remove the product from the packaging and remove all packaging material. Please check the
completeness and integrity of the delivery and notify your distribution partner immediately after
purchase if the delivery is not complete or if it is damaged.
The packaging includes:
• 1 x AMP 205 AV installation amplifier
• 1 x power supply device
• 1 set of terminal blocks
• 1 set of rubber feet (pre-assembled)
• 1 x mounting set for under- or on-table mounting
• User manual
INTRODUCTION
The LD Systems AMP 205 AV is the perfect compliment to deliver sound from an AV system.
Just connect your video source and it extracts the audio and delivers stereo audio to your
loudspeakers. An HDMI pass though connection makes connection to your display device easy.
Powered by a highly efficient 2 x 50 W Class-D amplifier, it features 4 Ohm outputs and a user-
friendly front panel, equipped with signal, clip, and protection LEDs.
Its tiny form factor (142 x 44 x 222) and included mounting plates allow it to be installed discreetly
almost anywhere; behind screens, under tables or even in air-handling spaces and above plenum
ceilings. Alternatively, it fits into 1/3 19 inch rack. Use the optional rack tray to slot up to four
TICA® series products alongside each other and build a system to your exact requirements,
using minimal rack space.
The AMP 205 AV uses an external 24 V power supply. Terminal block connections for the analogue
outputs and GPIO connections make wiring easy.
With remote control connectivity for third-party devices, you can adjust volume on either channel
or put the power amplifier into standby mode at any time, even when it's hidden.
Optional auto-standby saves power when no audio is running.
The perfect solution for professional installers and users looking to deliver higher performance
audio for the video systems.
FEATURES
• Professional mini amplifier with HDMI Audio de-embedder
• HDMI In- and Out and stereo line outputs
• 2 x 50 W Class-D amplifier with low impedance outputs
• Compact form factor and passive cooling
• Remote source select, standby and volume control
• External 100 – 240 V power supply
• Mounting plates for flexible inconspicuous installation, even above suspended ceilings
• Auto standby to save power
• Balanced line output and loudspeaker output on terminal blocks
• User-friendly front panel with signal, clip and protection LEDs
• Optional rack tray for combining with other TICA® series products
8