Silvercrest 366722 2101 Gebrauchsanleitung Und Sicherheitshinweise Seite 35

If the systole and diastole values are in two different ranges
(i.e. systole is "high, normal" and diastole is "normal") the
graphic categorisation on the device will always show the
higher range i.e. in the above example this would be "high,
normal".
Saving, requesting and deleting
measurements
The results of each successful measurement are saved
together with the date and time. If there are over 100 meas-
urement values, the oldest measurement value will be over-
written.
With the device switched off, press the START / STOP
button
.
Confirm your selection by pressing the memory button
M .
5
„A" will flash in the display
the saved measurements in the selected user memory
will be shown.
Press the memory button M
erage value of the last 7 days for the morning measure-
ment. (Morning: 5.00 am – 9.00 am, display "AM").
Press the memory button M
erage value of the last 7 days for the evening measure-
ment. (Evening: 6 pm – 8 pm, display "PM"). By pressing
the memory button M again, the last individual meas-
urement will be displayed with the date and time.
to select the desired user memory
8
and an average of all
4
again to display the av-
5
again to display the av-
5
GB/IE/NI 35