Silvercrest 366722 2101 Gebrauchsanleitung Und Sicherheitshinweise Seite 22

ence or the reduced electromagnetic stability of the
device and can lead to faulty functioning.
Failure to observe these instructions may lead to a re-
duction in the performance features of the device.
Initial use
Verify the parts listed in the scope of delivery are complete.
Remove all packaging material.
Inserting / Replacing batteries
Slide the battery cover off the battery compartment
11
(fig. C).
Insert the four type 1.5 V AAA (Alkaline type LR03)
batteries (with the correct polarity) into the device (fig. C).
Please note the marking inside the battery compartment.
Carefully close the battery cover on the battery com-
partment .
11
Do not use rechargeable batteries.
Note: if the change battery indicator
is displayed
18
continuously, measurement will not be possible until all
batteries have been replaced. As soon as the batteries
have been removed from the device, the date and time
will be reset. Saved measurements will still be stored.
All display elements will be shown briefly and „24h"
will flash on the display. Now set the date, time, time
22 GB/IE/NI