Silvercrest 366722 2101 Gebrauchsanleitung Und Sicherheitshinweise Seite 24

Before first use and after every battery change:
When you insert batteries into the device, you will auto-
matically arrive at the relevant menu.
If batteries have already been inserted:
On the switched-off device, hold the settings button
SET pressed for approx. 5 seconds.
6
Now proceed as follows:
The time format will flash. Use the function buttons -/+
to set the format to 12-hour or 24-hour. Press the SET
button
6
Use the function buttons - / +
the SET button
The month will flash.
Use the function buttons - / +
the SET button
Configure the day, hour and minute consecutively as
described above. Press the SET
each entry.
The Bluetooth
"On" and "OFF" will flash at the same time.
Using the function buttons "- / +", choose whether you
want to activate ("On" flashes) or deactivate ("OFF"
flashes) Bluetooth
to confirm.
If Bluetooth
automatically after the measurement has been taken.
Note: The battery life is reduced by transfer via Blue-
tooth .
®
24 GB/IE/NI
to confirm. The year will flash.
to confirm.
6
to confirm.
6
symbol will be shown on the display.
®
data transfer. Press the SET button
®
is activated ("On") data transfer will begin
®
to set the year. Press
7
to set the month. Press
7
button to confirm
6
7
6