Herunterladen Diese Seite drucken

Futurelight DMX SPLIT 6 Bedienungsanleitung Seite 16

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Mounting
Risk of injury caused by falling objects
Devices in overhead installations may cause severe injuries when crashing down. Make sure that the
device is installed securely and cannot fall down. The installation must be carried out by a specialist
who is familiar with the hazards and the relevant regulations.
The device may be fastened to a truss or similar rigging structure. The device must never be fixed swinging freely
in the room.
1) The rigging structure must support at least 10 times the weight of all fixtures to be installed on it.
2) Block access below the work area and work from a stable platform when installing the device.
3) Use rigging hardware that is compatible with the structure and capable of bearing the weight of the device. Please
refer to the "Accessories" section for a list of suitable rigging hardware.
4) Secure the device with a safety bond or other secondary attachment. This secondary safety attachment must
be sufficiently dimensioned in accordance with the latest industrial safety regulations and constructed in a way
that no part of the installation can fall down if the main attachment fails. Use the eyelet for fixation of the safety
bond. Fasten the safety bond in such a way that, in the event of a fall, the maximum drop distance of the
device will not exceed 20 cm.
5) After installation, the device requires inspections periodically to prevent the possibility of rot, deformation and
looseness.
Placing transmitter and receiver
The maximum distance between the transmitter and receiver is dependent on the ambient conditions. To optimize
range and performance maintain a line-of-sight between the transmitter and receiver and position the devices at
least 1 m above the audience, trees and other obstacles.
Power supply
The device uses an auto-range power supply that accepts input voltages between 100 und 240 volts. Connect the
device via the mains cable to a grounded mains socket. Thus, the device is switched on.
INSTALLATION
WARNING!
16 • EN

Werbung

loading

Diese Anleitung auch für:

70064822