Operation - G&D OperatorPanel Installationanleitung Und Betriebsanleitung

Operation

Operation
In the default settings, pressing and holding the
switching channels by accident.
ADVICE:
You can disable the Safety Switching function (see page 7) if you only
want to use the
Select
How to switch to a channel of the connected KVM switch:
1. Only if »Safety Switching« is enabled (default):
Press and hold the
2. Press the Select button of the channel you want to switch to.
NOTE:
Every three seconds, the device checks the active channel.
If you change the channel in the meantime, the device switches to the channel
that is selected at the
To prevent automatic switching, you can change the
10 · G&D OperatorPanel
button to switch between channels.
button.
Enable




OperatorPanel .
button prevents you from
Enable
Switching Priority (see page 8).