Safety Switching - G&D OperatorPanel Installationanleitung Und Betriebsanleitung

How to select the bit rates of the RS232 interface:
1. Start the terminal emulator.
2. Load the connection settings of the setup menu and establish the connection.
3. Use the Arrow
4. Press Space (repeatedly) to choose between the following options:
 9.600
 57.600
5. Press to save the values.
S
6. Press to return to the main menu.
Q

Safety Switching

To switch to a channel, press and hold the
to switch to the desired channel.
Pressing and holding the
nels by accident.
You can disable the
Select button to switch between channels
How to enable/disable »Safety Switching«:
1. Start the terminal emulator.
2. Load the connection settings of the setup menu and establish the connection.
3. Use the
Arrow
4. Press to disable (
Space
5. Press S to save the values.
6. Press Q to return to the main menu.
or Arrow keys to select
 19.200
 115.200 (Standard)
Enable button prevents you from switching between chan-
Safety Switching function (see page 7) if you only want to use a
or keys to select
Arrow
) or enable (
Off
Bitrate RS232 Port .
 38.400
 230.400
Enable button and press the
.
Safety Switching
) the function.
On
Setup menu
Select button
G&D OperatorPanel · 7