Introduction
Introduction
With the
OperatorPanel
desk simply by pressing buttons. A serial cable connects the device with the KVM
switch.
To switch to a channel, press and hold the
to switch to the desired channel.
Pressing and holding the
nels by accident.
ADVICE:
You can disable the
use the
Select
button to switch between channels.
Available variants
The device is available in different variants.
Number of switchable channels:
switches with up to two, four or eight channels.
The basic variants are available as desktop devices or for under-desk mounting
Design:
(deskmount).
Compatible G&D KVM switches
You can use the device to switch between the channels of the following KVM switches:
DL-MUX4
Package contents
1 ×
OperatorPanel
add-on
1 × serial cable for
1 × serial cable for
1 × serial cable for
1 × serial null modem cable (RS232-F/F-Crossover-2)
1 × serial adapter cable (Adapter SUBD9M/M-crossover)
1 × USB service cable
1 × 12V portable power pack
1 × power cable
1 × manual
2 · G&D OperatorPanel
add-on, you can switch a compatible KVM switch from your
button prevents you from switching between chan-
Enable
Safety Switching
Three basic variants enable you to switch KVM
DVIMUX
(RS232-M/F-2)
DL-MUX
and
DVIMUX
TradeSwitch
(CC-Link-2)
DVIMUX8-OSD
Enable
button, and press the
function (see page 7) if you want to
DVIMUX8-OSD
(Update-Cable-2)
Select
button
TradeSwitch