G&D OperatorPanel Installationanleitung Und Betriebsanleitung Seite 27

Setup menu
Changing the switching priority
If you switch the channel at the connected device (z. B. DL-MUX4, DVIMUX),
after three seconds, the
ned in the OperatorPanel
By selecting the option
write this channel and follows the setting of the other device.
How to change the switching priority:
1. Start the terminal emulator.
2. Load the connection settings of the setup menu and establish the connection.
3. Use the or
Arrow
4. Press Space to select between the following options:
Master
Follower
5. Press S to save your settings.
6. Press to return to the main menu.
Q
8 · G&D OperatorPanel
automatically switches back to the channel defi-
OperatorPanel
(default).
Follower under Switching Priority
keys to select
Arrow
If you switch the channel at the connected device, after
three seconds, the
to the channel defined in the
If you switch the channel at the connected device, the
ratorPanel does not overwrite this channel and follows the
setting of the other device.
, the OperatorPanel
.
Switching Priority
automatically switches back
OperatorPanel
OperatorPanel
does not over-
(default).
Ope-