Introduction; Package Contents - G&D MultiPower-12-NT Installationsanleitung

Introduction

The central power supply
The maximum power consumption permitted per device is 800 mA.
Power Status
M P -12-
ULTI OWER NT
Power Out 1 Power Out 2 Power Out 3 Power Out 4
Status Status Status Status
12VDC/800mA 12VDC/800mA 12VDC/800mA 12VDC/800mA
Use power loop cables to connect the Mini-DIN 4 sockets of up to twelve devices to
one of the Mini-DIN 4 sockets of the central power supply.
Two internal power packs ensure the redundant power supply of the
.
Power-12-NT
The LEDs on the front and the back panel show the device's operating status and
the load of all active devices.
The web application
central power supply.

Package contents

 1 × central power supply
 12 × power loop cables
 2 × power cable
 1 × USB service cable
 1 × manual
MultiPower-12-NT
Power Out 5 Power Out 6 Power Out 7 Power Out 8 Power Out 9
Status Status Status Status Status
12VDC/800mA 12VDC/800mA 12VDC/800mA 12VDC/800mA 12VDC/800mA
provides a graphical user interface to monitor the
Config Panel
MultiPower-12-NT
supplies up to twelve devices with 12 Volt.
Power Out 10 Power Out 11 Power Out 12
Load
Status Status Status Service
12VDC/800mA 12VDC/800mA 12VDC/800mA
G&D MultiPower-12-NT · 2
Introduction
Main Power Red. Power
Power
Red.
Main
Multi-