Parkside Performance PBSPA 12 B2 Originalbetriebsanleitung Seite 19

General description
An illustration of the most im-
portant functional components
can be found on the fold-out
page.
Extent of the delivery
Carefully unpack the appliance and check
that it is complete:
- Cordless Drill
- 7 wood drill bits
(3/4/5/6/7/8/10 mm)
- 25-part bit set
- Storage box
- Battery
- Charger
- Instruction Manual
Overview
1 Keyless drill chuck
2 Torque adjustment ring
3 Speed selector
4 Direction of rotation switch
5 Battery
6 Battery release button
7 Handgrip area
8 On/off switch
9 Battery Indicator
10 LED working light
11 Drill chuck aperture
12 Bit holder
13 Bits
14 Wood drill bits
15 Storage bag
16 Charger
Functional description
The cordless drill with two-speed gearing
has a 20+1 level torque adjustment, left/
right running, and an LED working light.
Please refer to the descriptions below for
information on how the operating elements
work.
Technical data
Cordless Drill .............. PBSPA 12 B2
Motor voltage U .......................... 12 V
Idling speed n
0
1st gear ............................ 0-460 min
2nd gear ........................ 0-1750 min
Maximum torque ..........................35 Nm
Span-chuck ............................ 0.8-10 mm
Weight (with battery) .... approx. 0.945 kg
Weight (accessories only) .. approx. 1.3 kg
Drilling capacity for wood .....max. 19 mm
Sound pressure level
(L ) ...................76.8 dB(A), K
pA
Sound power level
(L ) ................. 87.8 dB(A); K
WA
Vibration (a )
h
Screwdriving ...................... < 2.5 m/s
Temperature.......................... max. 50 °C
Charging process .................. 4 - 40 °C
Operation ..........................-20 - 50 °C
Storage ................................ 0 - 45 °C
Battery ...........................................Li-Ion
The specified total vibration value and the
stated noise emission value have been
measured according to a standardised test
method and can be used to compare one
power tool with another.
The specified total vibration value and the
stated specified noise emission value can
also be used for a provisional assessment
of the load.
GB MT
-1
-1
= 5 dB
pA
= 5 dB
WA
2
K= 1.5 m/s 2
19