Descaling hot-water wand
80
Fill in 1.5 litres of fresh
●
water.
Put a big vessel underneath
●
the hot-water wand.
Confirm using the „P"
●
button.
The buttons "P", "+" and
●
"-" illuminate one after the
other and the button lights
red.
Put two Graef descaling
●
tablets into the tank.
Press the
button three
●
times.
"CHECK" appears on the
●
display.
The process may last a few
●
minutes.
ca.
5 Min.
Allow the tablets approx. 5
●
minutes to dissolve.
„HW CLEAN" appears on
●
the LCD display.
Open control dial.
●
The descaling process starts.
The process is complete.
●