Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Store the car roll-away bed and its accessories in a
dark, dry and frost-free place that is inaccessible to
children. The optimum storage temperature lies be-
tween 5 and 30 ˚C. Store the power tool in its original
packaging. Cover the power tool to protect it from dust
or moisture. Store the operating manual with the power
tool.
13. Maintenance
• Check at regular intervals that all screw connections
are sufficiently tight.
• If necessary, tighten all screw connections.
• Have damaged screw connections replaced by an
authorised specialist.
Service information
With this product, it is necessary to note that the follow-
ing parts are subject to natural or usage-related wear,
or that the following parts are required as consuma-
bles.
Wearing parts*: Deflection rollers, support pads
* may not be included in the scope of supply!
15. Troubleshooting
The following table shows fault symptoms and describes remedial measures in the event of your product failing to
work properly. If you cannot localise and rectify the problem with this, please contact your service workshop.
Fault
Product cannot be
converted into a stool
Deflection rollers
difficult to move
Folding mechanism
difficult to move
18 | GB
Possible cause
Locking pin not pulled
Deflection rollers dirty
Deflection rollers defective
Hexagon screws tightened
too much
www.scheppach.com
Spare parts and accessories can be obtained from our
service centre. To do this, scan the QR code on the
cover page.
14. Disposal and recycling
Notes for packaging
The packaging materials are recy-
clable. Please dispose of packag-
ing in an environmentally friendly
manner.
Remedy
Pull out the locking pin to the maximum
Clean the deflection rollers
Replace deflection rollers
Tighten hexagon screws properly
Werbung
Inhaltsverzeichnis
Fehlerbehebung
