Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1.
Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
we hope your new tool brings you much enjoyment and
success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this product assumes no liability
for damage to the product or caused by the product
arising from:
• Improper handling,
• Non-compliance with the operating manual,
• Repairs carried out by third parties, unauthorised
specialists.
• Installing and replacing non-original spare parts
• Application other than specified
Please consider:
Read through the complete text in the operating man-
ual before installing and commissioning the product.
The operating manual is intended to help the user to
become familiar with the machine and take advantage
of its application possibilities in accordance with the
recommendations.
The operating manual includes important instructions
for safe, proper and economic operation of the prod-
uct, for avoiding danger, for minimising repair costs
and downtimes, and for increasing the reliability and
extending the service life of the product.
In addition to the safety instructions in this operating
manual, you must also observe the regulations applica-
ble to the operation of the product in your country.
Keep the operating manual package with the machine at
all times and store it in a plastic cover to protect it from dirt
and moisture. They must be read and carefully observed
by all operating personnel before starting the work.
The product may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards.
The required minimum age must be observed.
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such machines must also be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Product description (Fig. 1)
1.
Top frame
2.
Middle frame
3.
Bottom frame
4.
Deflection rollers
5.
Safety hole
6.
Locking pin
7.
Safety hook
3. Scope of delivery (Fig. 1)
• Operating manual
• Top frame with padding
• Middle frame with padding
• Bottom frame with padding
• Swivelling rollers (6x)
• Locking pin
Assembly material
A. Hexagon screw M8x53 (4x)
B. M8 washer (4x)
C. M8 locknut (4x)
D. Sleeve nut (4x)
E. Spring washer (4x)
F. Open-ended spanner (2x)
G. Allen key (1x)
4. Proper use
The product may only be used in the intended manner.
Any use beyond this is improper. The user/operator, not
the manufacturer, is responsible for damages or inju-
ries of any type resulting from this.
An element of the intended use is also the observance
of the safety instructions, as well as the assembly in-
structions and operating information in the operating
manual.
Persons who operate and maintain the product must
be familiar with it and must be informed about potential
dangers.
In addition, the applicable accident prevention regula-
tions must be strictly observed.
Other general occupational health and safety-related
rules and regulations must be observed.
The liability of the manufacturer and resulting damages
are excluded in the event of modifications of the product.
www.scheppach.com
GB | 15
Werbung
Inhaltsverzeichnis
Fehlerbehebung
