Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6. Startup / Operation
Take your caravan or trailer outdoors. We
suggest you choose a large area with sufficient
safety margin to people and objects until you
have
enough
experience
MoveControl.
Be carefull that no one is in the
moving area while mamoeuvring the
caravan!
Also check on the side of the
caravan which turned away from
you.
Keep a safe distance during moving.
Always keep sufficient distance of
the friction rollers after maintenance
or cleaning.
Switching plant absolutely current-
freely
against roll away at works in the
area of the friction rollers.
B1 Turn ON System
Turn ON the isolation switch.
Make sure that both drive units have
been disconnected from the vehicle tyres.
B2 Turn ON MoveControl
Activate
means of a double click on the I/O key at
the remote control (ON) - the LED will be
lighting.
Check
the
MoveControl by pushing the buttons on
the remote control.
GB8
in
operating
and
safeguarding
the
Cross
MoveControl
function
of
the
Caution: If the driving rollers will not turn, the
reset procedure must be effected at the base
station or a resynchronisation of the remote
the
control and the receiving unit (base station) must
be effected.
B3 Engaging the friction rollers:
First, travel the friction rollers to the tyres using
the remote control.
Simultaneously push the two arrow keys on the
remote control and keep them pressed until the
driving rollers are completely extended:
As soon as the final position is reached, the
PS will be switched-off automatically.
Only in this position the moving process is
vehicle
allowed to!
Undo the handbrake of your caravan.
B4 Moving
by
If no key should be actuated within 20 seconds,
the
remote
automatically and must be switched-on again.
Cross
+
Now you can execute the
movements according to the
symbols shown on the remote
control.
The
vehicle
moves as long as you keep the
buttons pushed down.
control
will
be
switched-off
only
Werbung
