Handicare 201904314 Gebrauchsanweisung Seite 5

Bedpan / Bucket frame – see figure 2:
The bedpan / bucket frame can be used in combination with a keyhole shaped or round bucket.
To assemble: The two end pieces (B, on the drawing) rest on the rear of the seat frame.
For keyhole shape bucket, insert the two front rods (A) into the inner holes (C).
For all other bucket shapes use the outer holes (D). If no bucket or bed pan is being used, the frame may be detached
so the chair fits easily over a toilet.
Figure 2
Height Adjustment – see figure 3:
By re-positioning the snaplocks on the chair legs, Combi may be adjusted to 6 different heights.
To adjust the height of the chair:
1. Remove snaplock
2. Select one of the 6 positions
3. Reinsert snaplock
Repeat for all 4 legs.
IMPORTANT: Check that all four legs are the same height and that all of the snaplocks are inserted correctly into the
frame before use.
Snaplock
1
3
2
Figure 3
5