Herunterladen Diese Seite drucken

SPL DAC768xs Schnellstartanleitung Seite 6

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Phonitor x – Quickstart
Phonitor Matrix settings
By using the MATRIX switch you can activate (ON) or deactivate (OFF) the
21
Phonitor Matrix.
The Phonitor Matrix creates a speaker-like listening experience on headphones, by mixing the left and right signals,
each delayed (interaural time difference) and attenuated (interaural level difference), to the corresponding opposite
side.
With the CROSSFEED switch you adjust the interaural level difference.
22
The level difference is comparable to the influence of different room sizes and their reflection and absorption char-
acteristics. The interaural level difference is frequency-corrected because the sound is reflected and absorbed by
the head in a non-linear fashion.
With the ANGLE switch you adjust interaural time difference.
23
The interaural time difference which is related to the placement of the speakers. The interaural time difference is
frequency-corrected because the sound is reflected and absorbed by the head in a non-linear fashion.
The MODE switch selects the playback – mono, stereo and stereo with an
24
extremely fine balance (LATERALITY).
Learn IR remote control
The volume potentiometer of the Phonitor x is motorized and can be oper-
25
ated by any infrared (IR) remote control. Set the OUTPUT switch to Mute while
learning the IR remote control commands.
The VU display now lights up red.
26
Press the IR PGM VOLUME button (infrared programmable volume).
Power LED now lights up brighter and the Volume controll moves fully counter clockwise.
Point your remote control towards the VU display and push the button you wish
lower
27
to use to
same button repeatedly until the Power LED lights up three times within a short
interval – programming of this button is then completed.
Point your remote control towards the VU display and push the button you wish
increase
28
to use to
the same button repeatedly until the Power LED lights up three times within a
short interval – programming of this button is then completed.
Learn mode ends automatically after the second button is learned.
6
the volume. The Power LED lights up once per push. Press the
the volume. The Power LED lights up once per push. Press

Werbung

loading

Diese Anleitung auch für:

Phonitor x