HomeMatic IP HmIP-eTRV-B-2 Installations- Und Bedienungsanleitung Seite 34

Configuration menu
• Select "OFF" using the minus but-
ton (D) to disable the operating
lock.
7.5 Time and date
To set the date and time, please pro-
ceed as follows:
• Press and hold the menu button
(G) for approx. 2 seconds to open
the configuration menu.
• Select the "Date/time" menu item
using the plus and minus buttons
(E + F).
• Confirm with the menu button.
• Select the desired year using the
plus and minus buttons and con-
firm with the menu button.
• Select the desired month using the
plus and minus buttons and con-
firm with the menu button.
• Select the desired day using the
plus and minus buttons and con-
firm with the menu button.
• Select the desired hours using the
plus and minus buttons and con-
firm with the menu button.
• Select the desired minutes using
the plus and minus buttons and
confirm with the menu button.
To confirm, the time flashes twice, and
the device changes back to the stand-
ard display.
7.6 Offset temperature
As the temperature is measured on the
wall thermostat, the temperature dis-
tribution can vary throughout a room.
You can set a temperature offset of
±3.5°C to adjust this. If, for example,
18°C is measured instead of the 20°C
set, an offset of -2.0°C must be set. An
offset temperature of 0.0°C is set in the
factory settings. To adjust the offset
temperature, please proceed as fol-
lows:
• Press and hold the menu button
(G) for approx. 2 seconds to open
the configuration menu.
• Select the "Offset" menu item using
the plus and minus buttons (E + F).
• Confirm with the menu button.
• Select the desired offset tempera-
ture using the plus and minus but-
tons and confirm with the menu
button.
To confirm, the temperature flashes
twice and the device changes back to
the standard display.
7.7 Programming a heating schedule
In this menu item, you can create a
heating schedule with six heating and
cooling phases (13 change settings)
according to your personal needs:
• Press and hold the menu button
(G) for approx. 2 seconds to open
the configuration menu.
• Select the "Prg" menu item using
the plus or minus buttons (E + F)
and confirm with the menu button.
• Under the menu item "DAY", use
the plus and minus buttons to se-
lect individual weekdays, all week-
days, the weekend or the entire
week for your heating schedule
and confirm with the menu button.
• Confirm the start time 00:00 hours
with the menu button.
• Select the desired temperature and
start time using the plus and mi-
34