Risk Of Electric Shock - Parkside Ppsz 700 A1 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung

Ensure an adequate supply of fresh air whilst welding, particularly
„
in small spaces, as welding produces smoke and harmful gases.
No welding work may be carried out on containers that have
„
been used for storing gases, fuels, mineral oils or similar – even if
they have been empty for a long time – as possible residues may
present a risk of explosion.
Special regulations apply in rooms where there is a risk of fire or
„
explosion.
Welded joints that are subject to heavy stress loads and are
„
required to comply with certain safety requirements may only be
carried out by specially trained and certified welders. Examples of
this are pressure vessels, running rails, tow bars, car bodies, etc.
Do not use the welder in the rain.
„
Do not use the welder in a moist environment.
„
Only place the welder on a level surface.
„

RISK OF ELECTRIC SHOCK:

Electric shock from a welding electrode can be fatal. Do not weld
„
in rain or snow. Wear dry insulating gloves. Do not touch the
electrodes with bare hands. Do not wear wet or damaged gloves.
Protect yourself from electric shock with insulation against the
workpiece. Do not open the device housing.
DANGER FROM WELDING FUMES:
Inhalation of welding fumes can endanger health. Do not keep
„
your head in the fumes. Use the equipment in open areas. Use
extractors to remove the fumes.
DANGER FROM WELDING SPARKS:
Welding sparks can cause an explosion or fire. Keep flammable
„
substances away from the welding location. Do not weld near
flammable materials. Welding sparks can cause fires. Keep a fire
extinguisher close by and an observer should be present to be
able to use it immediately. Do not weld on drums or any other
closed containers.
Welding sparks can injure your eyes and skin. Wear a hat and
„
safety goggles. Wear high, closed shirt collars. Wear complete
body protection.
DANGER FROM ELECTROMAGNETIC FIELDS:
Welding current generates electromagnetic fields. Do not use if you
„
have a medical implant. Never wrap the mains cable around your
body. Guide welding cables together.
10
GB/IE/NI/CY/MT