Connecting The Product To The Lidl Home App; Activate/Deactivate The Bluetooth ® Function On The Battery - Parkside Performance Pabsp 20 Li C3 Kurzanleitung/Originalbetriebsanleitung

Mark the spot where you want to drill using a centre punch
or nail. Select a low rotational speed when starting.
Pull the rotating drill bit from the hole repeatedly to remove
dust and chips and clear the hole.
Drilling in metal
Use a metal drill (HSS). For optimum results, cool the
drill bit with cooling lubricant (cutting oil). Metal drill bits
can also be used to drill into plastics. Start with a 3 mm
diameter drill bit and then increase the size until the desired
hole diameter is achieved.
Drilling in wood
Use a wood drill with a lathe centre.
Deep holes: Use an auger bit.
Large-diameter holes: Use a Forstner bit.
Small screws can be screwed directly into soft wood.
Belt clip (fig. J)
m
CAUTION! RISK OF INJURY!
Before hanging the product in the belt: Push the rotation
u
direction switch to the centre position (lock).
[ 5 ]
This prevents the product from being switched on
accidentally.
NOTE
The belt clip allows the tool to be hooked on belt
u [ 9 ]
or pocket.
The belt clip is not assembled upon delivery.
u
The belt clip can be mounted on either side of a belt.
u
For the assembly of the belt clip a cross tip screwdriver
u
is required.
1. Use a cross tip screwdriver to loosen the screw of the belt
clip .
9 ] [
2. Insert the belt clip on either side of the product.
3. Use a cross tip screwdriver to tighten the screw.
˜ Connecting the product to the Lidl
Home app
˜ Activate/deactivate the Bluetooth
function on the battery
Press and hold the
o
for 3 seconds to activate the Bluetooth
orange LED of the charging level LEDs
Bluetooth function is enabled.
®
Release the button
o
Press and hold the
o
for 10 seconds to deactivate the Bluetooth
orange LED of the charging level LEDs
function is deactivated. In the Lidl Home app
Bluetooth
®
the product is shown as offline.
18 GB
®
button on the battery pack
[ ]
function. The
®
lights up. The
[ ]
.
[ ]
button on the battery pack
[ ]
function. The
®
goes off. The
[ ]
˜ Connecting the product to the Lidl
Home app
NOTE
The product can only be connected to the Lidl Home
u
app if the battery pack
Only Smart Performance rechargeable batteries can be
u
connected to the Lidl Home app.
Press and hold the
o
for 3 seconds to activate the Bluetooth
Enable the Bluetooth
o
Open the Lidl Home app.
o
There are 3 different options to connect the product to the
o
Lidl Home app:
Connecting the product for the first time to the Lidl
Home app:
{Add device}
1. Select
app scans the area for available devices. The Lidl
Home app indicates if available devices have been
found.
NOTE
If the Lidl Home app cannot find available devices,
u
continue with "No automatic suggestion of available
devices".
{Go to add}
2. Tap
3. Tap to select the battery pack
NOTE
Select only one device at a time. If there are check
u
marks for other products:
Tap to clear the marks.
4. Tap .
{Done}
5. Tap to confirm the connection. The battery pack is
listed in the tab and can be selected.
6. Select the battery pack. The information of the cordless drill
"PABSP 20 Li C3 (2207)" can be found in
{Device info}.
NOTE
[ ]
{Smart device not
If
u
under {Device
Check if the battery pack
product.
[ ]
Check if the connection status LED
continuously.
is inserted in the product.
[ ]
button on the battery pack
[ ]
function.
®
function on your smartphone.
®
tab. The Lidl Home
on the
to show the available devices in the list.
.
[ ]
connected}
is displayed
info}:
is inserted into the
[ ]
lights up
[ ]
[ ]