Scheppach EGT350 Originalbetriebsanleitung Seite 28

12. Troubleshooting
The table below contains a list of fault symptoms and explains what you can do to remedy the problem if your
equipment fails to work properly. If the problem still persists after working through the list, please contact your
nearest service workshop.
Fault Possible cause
Machine does not • Supply voltage not on
start
• On/Off switch faulty
• Worn carbon brushes
• Motor faulty
• Power cable damaged
Machine works with • Power cable damaged
interruptions
• Internal connections are loose
• On/Off switch faulty
Appliance not cutting • Spool of string is too short or is
28 | GB
empty
www.scheppach.com
Remedy
• Check the socket or the electricity supply;
if required, arrange repair by an authorised
electrician.
• Contact the service centre
• Contact the service centre
• Contact the service centre
• Check the extension lead and have it re-
placed, if required.
• Check the extension lead and have it re-
placed, if required.
• Contact the service centre
• Contact the service centre
• Adjust the spool of string or Change the
spool