Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• Keep the tool out of the rain and away from moisture.
The ingress of water into an electric tool increases
the risk of an electric shock.
• Do not use the cable to carry the electric tool, to
hang it up or to pull it out of the socket. Keep the
cable away from heat, oil, sharp edges and moving
parts of the appliance. Damaged or entangled ca-
bles increase the risk of an electric shock.
• If you are working outdoors with an electric tool,
only use extension cables which are designed spe-
cifically for this purpose. Using specially designed
outdoor extension cables, the risk of electric shock
is reduced.
• If operation of the electric tool in a damp envi-
ronment can not be avoided, use a earthleakage
circuit-breaker. The earth-leakage circuit-breaker
reduces the risk of an electric shock.
Warning! This electric tool generates an electromag-
netic field during operation. This field can impair ac-
tive or passive medical implants under certain condi-
tions. In order to prevent the risk of serious or deadly
injuries, we recommend that persons with medical
implants consult with their physician and the manu-
facturer of the medical implant prior to operating the
electric tool.
3 Safety of persons
• Be careful, watch what you are doing and use an
electric tool sensibly. Do not use the tool if you are
tired or under the influence of drugs, alcohol or
medication. A moment of inattention when using
the electric tool can result in serious injuries.
• Wear personal protection equipment and always
wear safety goggles. Wearing personal protection
(such as dust masks, non-slip safety shoes, safety
helmet or ear protection, depending upon the type
and use of the electric tool) reduces the risk of injury.
• Make sure that the appliance cannot start up ac-
cidentally. Ensure that the electric tool is switched
off before you connect it to the power supply and/or
insert the battery, or pick up or carry the tool. If your
finger is on the switch whilst carrying the electric tool
or if you connect the appliance to the mains when it
is switched on, this can lead to accidents.
• Remove keys and wrenches before switching on
the electric tool. A tool or key which comes into
contact with rotating parts of the appliance can lead
to injuries.
22 | GB
• Avoid abnormal working postures. Make sure you
stand squarely and keep your balance at all times.
In this way, you can control the electric tool better
in unexpected circumstances.
• Wear suitable work clothes. Do not wear loose cloth-
ing or jewellery. Keep hair, clothes and gloves away
from moving parts. Loose clothing, jewellery or long
hair can get trapped in moving parts.
• If vacuuming devices and draining devices can be
fitted, make sure that these are correctly attached
and correctly used. The use of a dust extraction
system can reduce the danger posed by dust.
4 Usage and treatment of the electric tool
• Do not overload the appliance. Use the correct tool
for your work. You will be able to work better and
more safely within the given performance bound-
aries.
• Do not use an electric tool with a defective switch.
An electric tool that cannot be switched on or off is
dangerous and must be repaired.
• Pull the plug out of the socket and/or remove the
battery before making any adjustments to the ap-
pliance, changing accessories or put the appliance
down. This safety measure prevents starting the
electric tool unintentionally.
• Keep unused electric tools out of the reach of chil-
dren. Do not allow people who are not familiar with
the appliance or who have not read these instruc-
tions to use the appliance. Electric tools are dan-
gerous if they are used by inexperienced people.
• Clean your electric tool carefully. Check whether
moving parts are functioning properly and not jam-
ming, whether parts are broken or damaged enough
that the functioning of this electric tool is affected.
Have damaged parts repaired before using the ap-
pliance. Many accidents are caused by badly main-
tained electric tools.
• Make sure to use electric tools, accessories, attach-
ments, etc. in accordance with these instructions.
Take the conditions in your work area and the job in
hand into account. Using electric tools for any pur-
pose other than the one for which they are intended
can lead to dangerous situations.
5 Service
• Have your electric tool repaired only by trained
personnel using only genuine spare parts. This
will ensure that your electric tool remains safe to
use.
www.scheppach.com
Werbung
