Cleaning And Care - Invacare Basic Gebrauchsanweisung

Maintenance
Check mattresses
▸ Unzip the cover completely.
▸ Check for any staining on the white underside of the cover.
▸ Check for any staining on the interior foam.
▸ Replace any stained items and dispose of as per local authority pro-
cedure.

4.2 Cleaning and Care

Cleaning Soft Covers (Invacare
The soft multi-stretch cover must be laundered at 40 °C and then hung
from a line or bar and drip dried in a clean indoor environment.
!
IMPORTANT
▸ Do not tumble dry the soft multi-stretch cover.
Cleaning PU Covers (Invacare
(Removal of contaminants such as dust and organic matter)
▸ Remove all covers for laundering.
▸ Launder the covers with the recommended temperature between
60 – 80 °C using a diluted detergent solution, (Instructions on label.)
!
IMPORTANT
Washing at higher temperatures may cause shrinkage.
Drying covers
▸ Hang mattress covers from a line or bar and drip dry in a clean
indoor environment.
or
▸ Tumble dry on a low heat setting.
!
IMPORTANT
▸ Tumble dry setting must not exceed 40 °C.
▸ Do not tumble dry for longer than 10 minutes.
▸ Washing at higher temperatures may cause shrinkage.
▸ Dry covers thoroughly before re-fitting to the mattress.
Basic White)
®
Basic Blue)
®
Disinfecting covers
(Reducing the number of microorganisms)
Please contact your hygiene specialist in the event of contamination.
!
IMPORTANT
Ensure that any residual detergent has been removed prior to
disinfection.
Light soilage
▸ Wipe down the cover with a 0.1% Chlorine Solution (1,000 ppm).
▸ Rinse the cover with clean water using a single use nonabrasive cloth.
▸ Dry the cover thoroughly.
Heavy soilage
Where the mattress is badly soiled, we recommend cleaning with a
dilute cleaning solution at 80 °C in the washing machine.
!
IMPORTANT
1% Chlorine Solution used on a regular basis can diminish the
life of the cover if not rinsed and dried properly.
▸ Do not use granules.
▸ Clean up all spillages of bodily fluids i.e. blood, urine, faeces, sputum,
wound exudater and all other bodily secretions as soon as possible
using a 1% Chlorine Solution (10,000 ppm).
Large spillages of blood should be absorbed and removed with
i
paper towels first and followed by as above.
▸ Rinse the cover with clean water using a single use nonabrasive cloth,
and thoroughly dried.
!
IMPORTANT
Polyurethane coated fabrics can absorb liquids for short peri-
ods causing a temporary change to the polyurethane charac-
teristics. The mattress cover swells temporarily and is more
vulnerable to physical damage for a period after it is completely
surface dried, by which time it will revert to its previous state.
▸ Dry the cover thoroughly.
Basic-Mattresses
7