Belt Buckle Functioning And Cleaning - Maxi-Cosi Mobi Bedienungsanleitung

Mobi
Semibold Italic 36 pt
Mobi XP
C. Reattaching the seat cover
Mobi
Semibold 36 pt
Mobi XP • Place the cover back on the Maxi-Cosi Mobi.
• Thread the belt buckle and shoulder belts through the cover (51).
51
• Reattach the cover all around by fastening it to the hooks (52).
52
• Reattach the belt pads (9).
9
• IMPORTANT! Make sure the strap between the belt pads lies tight against the plastic shell and does not
become entangled with the belt portion of the support leg.
Mobi
• Thread the shoulder belts through the belt pads, cover and shell (10).
Semibold Italic 36 pt 10
Mobi XP
• Attach the shoulder belts to the belt yoke and check to make sure the 3 red stitching on the belt ends and
11
the belt yoke are facing the shell (11) (if not, this means the belts are twisted).
• IMPORTANT! Make sure the belts are threaded along the plastic shell, remain behind the rods and do not
12
Mobi
become entangled with and stay behind the belt portion of the support leg (12).
Semibold Italic 36 pt
Mobi XP
• Check the functioning of the harness system.
Mobi
Removing the cover and belt pads
Semibold 36 pt
Mobi XP
• Make sure that the seat buckle is locked in order to prevent the belts from twisting.
• The belt clamping handle must be locked, i.e. positioned against the base.
• Loosen the shoulder belts.
• Place the Maxi-Cosi Mobi XP in the sleeping position.
• Remove the shoulder belts from the belt yoke (XP12).
XP12
• Tilt the clasp on the belt pad and pull it together with the shoulder belt through the belt slots.
XP13
This is easiest to do in the uppermost vertical section (XP13).
Mobi
• Remove both belt hooks by pushing the tab on the back of the seat downwards (XP14).
Semibold Italic 36 pt
Mobi XP
XP14
• Loosen the cover on all sides (XP15). Open the belt buckle.
XP15
• Pull the belts, belt pads, buckle sections and seat buckle through the openings in the cover.
• Now remove the cover. Important: Be careful when removing the cover around the edge of the
XP16
Mobi
release button (XP16).
Semibold Italic 36 pt
Mobi XP
• Slide the belt pads off the belts (XP17).
XP17
Mobi
Semibold 36 pt Replacing the cover and belt pads
Mobi XP
• First slide both buckle sections together and lock into the belt buckle.
• Slide the shoulder belts through the clean belt pads ensuring that the textured side of the belt pad is facing
XP18
downwards. Push the shoulder belts through the large opening of the clasp. Important: Make sure the
shoulder belts are on top of the belt pad strap (XP18).
• Open the buckle and feed the buckle, shoulder belts and buckle parts through the openings in the cover (XP19).
XP19
• Place the cover over the edges of the release button and around the adjusting handle and secure it onto the
XP20
cover pins (XP20).
• "Click" both belt hooks into position (XP21) and check to make sure they are securely fastened.
XP21
• Secure the shoulder belt clasps in the belt slots at the desired height (XP22/XP23).
XP22 XP23
• Attach the shoulder belts to the belt yoke. Important: The red stitching on the shoulder belts and belt yoke
XP24
must be facing the shell (XP24). If not, this means the belts are twisted.
• Fasten the belt buckle and close the flap on the cover (XP25) and check the functioning of the adjustment
XP25
system.
• IMPORTANT! Make sure the belts are threaded along the plastic shell, remain behind the rods and do not
12
become entangled with and stay behind the belt portion of the support leg (12).
4.3 Belt buckle and belt adjustment system functioning and cleaning
The proper functioning of the belt buckle and belt adjustment system is very important for the safety of the child.
The most common reason that the buckle and/or belt adjustment system does not function properly is because
it is dirty (from dust, grime, food particles, etc.). Make sure that the belt buckle stays clean by vacuuming out all
dirt. If the belt adjustment system is not functioning properly, contact your supplier or importer immediately (see
back of instruction manual for contact details). Do not use the Maxi-Cosi Mobi (XP) under any circumstances!
The following is a list of possible causes of function failure and possible solutions.
Instructions for use
EN
15