Canon iR1018 Serie Kurzanleitung Seite 7

Connect the Power Cord, Turn On the Machine,
1
Main power switch
Connect the supplied power cord into the rear
socket and the wall outlet and press the [I] side of
the main power switch to ON.
What if...
● <CLOSE COVER/FRONT OR LEFT COVER> is displayed:
Make sure that the front or left cover is closed properly.
(See "Install the Toner Cartridge," on p. 3, or "Install the Drum Unit," on p. 5.)
● <OUT OF TONER/CHANGE TONER> is displayed:
Make sure that the toner cartridge is installed properly.
(See "Install the Toner Cartridge," on p. 3.)
● <DRUM IS NOT SET/INSERT THE DRUM> is displayed:
Make sure that the drum unit is installed properly.
(See "Install the Drum Unit," on p. 5.)
● <LOAD PAPER> is displayed:
Make sure that paper is loaded in the paper drawer properly.
(See "Load Paper," on p. 7.)
11
2
Ex.
D I S P L A Y L A N G U A G E
E N G L I S H
If <DISPLAY LANGUAGE> appears, press [ ]
or [
] to select a language for the LCD, then
press [OK].
and Select Language and Country
3
Ex.
C O U N T R Y S E L E C T
U K
If <COUNTRY SELECT> appears, press [ ]
or [ ]
to select a country, then press [OK].
4
Without optional drawer
1 0 0 % A 4
0 1
A T E X T
With optional drawer
1 0 0 % A U T O
0 1
A T E X T
The machine enters the standby mode.
WARNING
This product emits low level magnetic flux. If you use a
cardiac pacemaker and feel abnormalities, please move
away from this product and consult your doctor.
NOTE
– During electrical storms, disconnect the power cord
from the power outlet. (Please note that any
documents stored in the machine's memory will be
deleted when you unplug the power cord.)
– Whenever you unplug the machine, wait at least five
seconds before you plug it in again.
– Do not plug the machine into an uninterruptible power
supply (UPS).
12