Installation Procedure - Canon iR1018 Serie Kurzanleitung

Installing/Uninstalling Software

Installation Procedure

Perform the following procedure to install the printer, fax, and scanner drivers. If you install these
drivers, you can print and send faxes from your computer, and scan documents into your computer.
Printer drivers are divided into two types: PCL and UFRII LT.
● PCL: This is the Hewlett-Packard's PCL printer driver, which includes the PCL5c, PCL5e, and PCL6
drivers. The PCL5c printer driver is for color printers, while the PCL5e and PCL6 printer drivers are
for black-and-white printers. PCL6 is an advanced version of PCL5e and offers superior printing
quality and speed. This machine supports the PCL5e and PCL6 printer drivers.
● UFRII LT: This is the Canon UFRII LT printer driver. Using this driver, the various data processing
tasks conventionally executed within the printer are appropriately divided between the host PC and
the printer to greatly reduce the overall printing time. The workload can be delegated to match the
output data, thus realizing a significant increase in speed through optimization.
Before Installation:
• Do not connect the USB cable before installing the
software. If you connect the USB cable before
installing the software and the Found New Hardware
Wizard screen appears, click [Cancel].
• For Windows 2000/XP/Server 2003, logon as
Administrator to install the software.
• Make sure the machine is turned on before
connecting the USB cable.
• On the screen shown at each step, click on the
circled button to proceed.
• The machine does not come with a USB cable.
3
If the CD-ROM Setup screen
is not displayed, on the
Windows desktop double-click
[My Computer]. Open the CD-
ROM icon, then double-click
[MInst (MInst.exe)].
27
System Requirements
Microsoft Windows 98/98SE
CPU: Intel Pentium/90 MHz or faster
Memory: 128 MB or more
Available Hard Disk Space: 355 MB or more
Microsoft Windows Me
CPU: Intel Pentium/150 MHz or faster
Memory: 128 MB or more
Available Hard Disk Space: 295 MB or more
Microsoft Windows 2000
CPU: Intel Pentium/133 MHz or faster
Memory: 128 MB or more
Available Hard Disk Space: 1.0 GB or more
4
(iR1018 and iR1022 Series Only)
NOTE
– The PCL printer driver is optional for iR1018/1022A/1022F. You can use the PCL printer driver if the optional PCL kit is
installed.
– The fax driver is available only for the iR1022F/1022iF.
– The scanner driver is available only through a USB connection.
– You can use the iR1018/1022A/1022F as a network printer if the optional network board is installed.
USB Connection
Microsoft Windows XP (32-bit 1
version)
CPU: Intel Pentium/Celeron series
300 MHz or faster
Memory: 128 MB or more
Available Hard Disk Space: 1.5 GB or
more
Microsoft Windows Server 2003
(32-bit version)*
CPU: Intel Pentium/Celeron series
133 MHz or faster
Memory: 128 MB or more
Available Hard Disk Space: 2.0 GB or
more
* Only for network connection.
5 6
2
7
28