Canon iR1018 Serie Kurzanleitung Seite 14

4 5
Confirm that <1. TCP/IP Confirm that <1. IP
SETTINGS> is ADDRESS AUTO.> is
displayed, then press displayed, then press
[OK]. [OK].
10 11
Use the numeric keys Confirm that
to enter the subnet <4. GATEWAY
mask, then press ADDRESS> is
[OK]. displayed, then press
[OK].
Ex.
S U B N E T M A S K
0 0 0 . 0 0 0 . 0 0 0 . 0 0 0
25
6
Press [ ] or [ ] to
select <OFF>, then
press [OK].
12
Use the numeric keys
to enter the gateway
address number, then
press [OK].
Ex.
G A T E W A Y A D D R E S S
0 0 0 . 0 0 0 . 0 0 0 . 0 0 0
7 8
Confirm that <2. IP Use the numeric keys to
ADDRESS> is enter the IP address,
displayed, then press then press [OK].
[OK].
Ex.
I P A D D R E S S
0 0 0 . 0 0 0 . 0 0 0 . 0 0 0
13
Turn off the main
NOTE
power on the right side
If you send documents via e-mail
of the machine, then and I-fax, specify the
E-MAIL/I-FAX settings. (See
turn on the power to
Chapter 3, "Network," in the
restart the machine.
Advanced Operation Guide.)
9
Confirm that <3.
SUBNET MASK> is
displayed, then press
[OK].
26