Canon iR1018 Serie Kurzanleitung Seite 27

9
Turn the lever as far as it will go
counterclockwise.
A
10
Push down the lever.
11
Close the front cover.
CAUTION
– Be careful not to get your fingers caught.
– If you cannot close the front cover, do not force it to
close. Open the cover and make sure the toner
cartridge is properly set in the machine.
51
Drum Unit
When <REPLACE THE DRUM> appears on the
LCD display, replace the drum unit.
WARNING
Do not throw used drum unit into open flames, as they may
ignite the toner remaining inside the unit, and result in burns or
a fire.
CAUTION
If you use the machine without inserting the drum unit
<INSERT THE DRUM> appears on the LCD display. In this
case, turn OFF the main power, and install the drum unit into
the machine.
1
Open the left cover.
2
Holding the grips on the drum unit, slightly
lower and remove it from the machine.
CAUTION
Do not touch the fixing assembly as it becomes very hot
during use.
3
Open the package of the new drum unit and
remove the protective packing material (A).
A
4
Hold the unit by its grips on both sides.
5
Align the marks on both sides of the drum
unit (B) with the marks on the machine (A),
and push the unit into the machine as far as it
will go.
A
B B
CAUTION
Do not touch the fixing assembly as it becomes very hot
during use.
6
After the unit is completely inserted, remove
the orange paper.
7
Close the left cover.
CAUTION
– Be careful not to get your fingers caught.
– Do not touch the portion (A) as the image quality of
printouts may deteriorate.
A
A
52