Leica M Monochrom Anleitung Seite 248

Sensitivity range
ISO 320 to ISO 12500, adjustable in
automatic control or manual setting
Exposure mode
Choice of automatic shutter speed control with manual aperture
preselection - aperture priority
aperture setting
Flash exposure control
Flash unit attachment
Using accessory shoe with center and control contacts or using
SCA adapter set (see p. 220)
Synchronization
Optionally triggered at the 1st or 2nd shutter curtain
Flash sync speed
= / s; slower shutter speeds can be used, if working below
1
180
sync speed: Automatic changeover to TTL linear flash mode with
HSS-compatible Leica system flash units
Flash exposure metering
(with SCA-3502-M5 adapter or SCA-3000 standard flash unit, e.g.
Leica SF 26) Control with center-weighted TTL pre-flash metering
Flash measurement cell
2 silicon photo diodes with collection lens on the camera base
/ ISO increments, choice of
1
3
, or manual shutter speed and
A
Flash exposure compensation
±3 / EV, adjustable in / EV steps via the menu, and when using
1 1
3 3
correspondingly equipped Leica system flash units
Displays in flash mode (in viewfinder only)
Ready: Constant illumination of flash symbol LED in viewfinder
Viewfinder
Viewfinder principle
Large, bright-line frame viewfinder with automatic parallax
compensation
Eyepiece
Calibrated to -0.5 dpt.; corrective lenses from -3 to +3 diopter
available
Image field indication
By activating two bright-line frames each: For 35 and 135mm, or
for 28 and 90mm, or for 50 and 75mm; automatic switching when
lens is attached; frame color (red/white) selectable in menu
Parallax compensation
The horizontal and vertical difference between the viewfinder and
the lens is automatically compensated according to the relevant
distance setting, i.e. the viewfinder bright-line frame automatically
aligns with the subject detail recorded by the lens
EN
245