Leica M Monochrom Anleitung Seite 214

4. Confirm your settings - only possible if the eighth position is
active - by pressing the
SET
• A further sub-menu appears, showing
.
numbering?
5. Select or .
Yes No
or button.
INFO
Reset image
Changing picture file names
1. In the main camera menu, (see p. 150/240) select
(page 4/section
numbering
2. select in the sub-menu.
Change file name
• The name of the picture file appears. The first character is
marked as ready for editing.
Positions 1-4 can be changed.
3. The numbers and letters are changed by turning the thumb-
wheel or by pressing up and down on the direction pad, while
you select different positions by pressing
– the INFO button,
– or the button,
SET
– or left or right on the direction pad.
The available characters are upper case letters from
numbers from to and the underscore
0 9
this order in an endless loop.
4. Confirm your settings - only possible if the fourth position is
active - by pressing the
SET
• The setting menu described under 2. appears again.
Image
), and
SETUP
to , the
A Z
which appear in
_
or INFO button.
EN
211