Leica M Monochrom Anleitung Seite 206

Review with clipping indicators
You can use the menu to set the clipping thresholds for displaying
both the light and dark areas.
Press the INFO button twice (starting from normal review mode), to
display the areas without marking.
• Excessively light areas are indicated in red, excessively dark
areas in blue, flashing in each case. The clipping symbol ( ) also
appears in the bottom right.
Setting the function
1. In the main camera menu, (see p. 150/240) select
(page 3/ section ), and
SETUP
2. set the upper and lower thresholds in the sub-menu.
• The scale shows the clipping areas relative to the overall
exposure range.
Notes:
• The clipping indicators are available when viewing both the
entire picture and a section of it, but not when simultaneously
viewing 4, 9 or 36 reduced pictures (see p. 205).
• The clipping indicators always relate to the detail of the picture
currently displayed (see p. 205).
EN
Clipping
203