What To Do If - Electrolux EOV5821 Benutzerinformation

13. WHAT TO DO IF...

WARNING!
Refer to "Safety information"
chapter.
Problem
The appliance does
not heat up.
The appliance does
not heat up.
The appliance does
not heat up.
The appliance does
not heat up.
The display shows
F111.
The lamp does not
operate.
The display shows
"Demo". The appli-
ance does not heat
up. The fan does
not operate.
If you cannot find a solution to the prob-
lem yourself, contact your dealer or the
service centre.
Possible cause
The appliance is deactiva-
ted.
The clock is not set.
The necessary settings are
not set.
The fuse is released.
The CT Sensor plug is not
correctly installed into the
socket.
The lamp is defective.
The test mode is activated.
Activate the appliance.
Set the clock.
Make sure that the settings
are correct.
Make sure that the fuse is
the cause of the malfunc-
tion. If the fuse releases
again and again, contact an
authorized electrician.
Put the plug of core temper-
ature sensor as far as possi-
ble into the socket.
Replace the lamp.
1.
Deactivate the appli-
ance.
2.
Touch and hold
the appliance activates
and deactivates.
3.
Touch and hold
at the same time un-
til an acoustic signal
sounds and "d" goes
out.
The necessary data for the service centre
is on the rating plate. The rating plate is
on the front frame of the appliance cavity.
ENGLISH 29
Remedy
until
and