Energy Saving; Residual Heat; Clock Functions - Electrolux EOV5821 Benutzerinformation

12 www.electrolux.com
3. Set the heating function. Press OK to
confirm.
4. Set the temperature. Press OK to
confirm.
Press once or twice
rectly to the Heating Functions
menu (when the appliance is acti-
vated).
6.5 Heat-up indicator
When you activate a heating function, the
bar on the display comes on. The bar
shows that the temperature increases.
6.6 Fast Heat Up indicator
This function decreases the heat-up time.
To activate the function, hold
onds. You will see the heat-up indicator
alternates.

6.7 Residual heat

When you deactivate the appliance, the
display shows the residual heat. You can
use the heat to keep the food warm.

7. CLOCK FUNCTIONS

7.1 Clock functions
Symbol
If you set the time for a clock function, the
time starts to count down after 5 sec-
onds.
If you use the clock functions Du-
ration
the appliance deactivates the
heating elements after 90 % of the
to go di-
for 3 sec-
Function
To set a countdown (max 2 h 30 min). This function
has no effect on the operation of the appliance. You
Minute Minder can also activate it when the appliance is off. Use
to activate the function. Press
minutes and OK to start.
To set how long the appliance has to be in opera-
Duration
tion (max. 23 h 59 min).
To set the switch-off time for a heating function
End Time
(max. 23 h 59 min).
and End Time

6.8 Energy saving

The appliance contains fea-
tures which help you save en-
ergy during everyday cooking:
• Residual heat:
– When the heating function or pro-
gramme operates, the heating ele-
ments are deactivated 10 % earlier
(the lamp and fan continue to oper-
ate). For this feature to operate, the
cooking time must be longer than 30
minutes or you must use the clock
functions ( Duration , End Time ).
– When the appliance is off, you can
use the heat to keep food warm. The
display shows the remaining temper-
ature.
• Cooking with the lamp off - Touch
and hold
vate the lamp during cooking.
• Eco functions - refer to " Heating
Functions ".
Description
set time. The appliance uses the
residual heat to continue the
cooking procedure until the time
ends (3 - 20 minutes).
,
Setting the clock functions
1. Set a heating function.
for 3 seconds to deacti-
or to set the