Akrapovic Racing Single & Twin Einbauanleitung Seite 32

www.akrapovic.com
8. Correctly position the carbon-fiber clamp(s) and slide it onto the muffler - For Racing single exhaust only: bear in
mind the left offset of the carbon-fiber clamp viewed from the rear. For Racing twin exhaust only: bear in mind the
left offset of the carbon-fiber clamp viewed from the rear for the right side muffler and the right offset of the carbon-
fiber clamp viewed from the rear for the left side muffler.
IMPORTANT: open the clamp(s) slightly wider than the diameter of the outer sleeve(s) of the muffler – do
not scrape it along the muffler outer sleeve! (F 53).
9. Position the muffler(s) correctly and slide it onto the outlet side of the link pipe(s), hand tighten the muffler clamp(s)
to the bracket(s) and attach the springs
IMPORTANT: make sure, that springs pull the muffler(s) all the way onto the link pipe – use rubber mallet
if necessary to tap the connections into place! (F 54, 55, 56, 57).
F 53
F 54
32 / 40