Akrapovic Racing Single & Twin Einbauanleitung Seite 31

6. Tighten the lambda sensor; make sure not to damage the sensor's electrical lead (F 51, 52).
IMPORTANT: grease only the threads of the lambda sensor!
7. For Racing twin exhaust only: slide the twin ink pipe/collector onto the collectors and attach the springs.
IMPORTANT: make sure, that springs pull the link pipe all the way onto the collectors – use rubber mallet if
necessary to tap the connections into place! Tighten the twin ink pipe/collector onto the bracket (tightening
torque 22Nm/16ftlb).
31 / 40
22Nm
16ftlb
F 51
F 52