Maintenance Table; Once Per Day; Once Per Week; Every 2 Years - VHF E5 Originalbetriebsanleitung

Maintenance

7.6 Maintenance table

7.6.1 Once per day

Action
Performing the daily cleaning
7.6.2 Once per w eek
Action
Cleaning the collet chuck
Performing the weekly
cleaning

7.6.3 Every 2 years

Action
Preventive maintenance

7.6.4 When necessary

Action
Updating the software and firmware
Recommended interval / Terms
After work
n
10 operating hours
n
If soiled
n
Recommended interval /
Terms

Once per week

n
20 operating hours
n
Once per week
n
20 operating hours
n
Recommended interval
Every 2 years
n
2000 operating hours
n
Recommended interval
When an update is available
Original Operating Instructions: E5
Version: 2/10/2023
Procedure / Tools
Performing the daily cleaning – on page 44

Procedure / Tools
Clean or replace the collet cuck of the spindle – on

page 47
Performing the weekly cleaning – on page 45

Contact customer service.
Procedure / Tools
Updating the software and firmware – on page 97

EN 41
Procedure / Tools