Kessel EasyClean free Mix & Pump Einbau- Und Betriebsanleitung Seite 23

Attachment of the refill inlet
Pull clips off the attachment clamp.
Pull the refill inlet pipe out of the attachment clamp.
Insert the refill inlet pipe with pre-assembled seal into the
opening for pipe penetration.
Slide in the refill inlet pipe in such a way that it can be
fixed in place with the attachment clamp.
Attach clips to the attachment clamp.
Refill inlet is ready for operation.
4.4 Installing the manual valve
Install manual valve on site.
4.5 Make the electrical connections
Connection diagram
See the separate instructions for the „Connect 400 V grease separator" control unit.
4.6 Mount the accessory parts
Connecting Storz-B coupling
Connect the Storz-B coupling to the riser pipe/disposal pipe provided by the customer.
If the Storz-B coupling is to be positioned at some distance outside the building, the KESSEL disposal chamber (acces-
sory) can be used for this.
016-189_03 Installation and operating instructions 23 / 92