Ikra GGSI 200 Gebrauchsanweisung Seite 27

power tool on. A wrench or other tool
that is inside or on a rotating part of the
tool may cause injury.
e) Avoid unusual postures. Make sure
to have a safe footing and keep your
balance at all times. This will allow
you to better control the power tool in
unexpected situations.
f) Wear suitable clothes. Do not wear
wide clothing or jewellery. Keep your
hair, clothes and gloves clear of all
moving parts. Loose clothing, jewellery
or long hair may get caught in moving
parts.
g) If dust extraction/collection devices
are provided make sure that they are
connected and used properly. The
use of a dust extraction device may
reduce risks caused by dust.
4) Careful handling and use of power
tools
a) Do not overtax the power tool. Use
the power tool intended for your type
of work in each case. The use of the
suitable power tool within the stated
range of performance makes working
more effective and safer.
b) Do not use a power tool with a dam-
aged switch. A power tool that cannot
be switched on or off any more is dan-
gerous and must be repaired.
c) Pull out the plug connector from the
socket and/or remove the battery be-
fore you change the device settings,
change accessories, or put away the
device. These care instructions prevent
the device from starting unintentionally.
d) Store power tools out of the reach
of children. Do not allow persons to
use the tool if they are not familiar
with the tool or these instructions.
Power tools are dangerous if used by
inexperienced persons.
e) Thoroughly maintain your power
GB | Operating Instruction
f) Keep cutting tools sharp and clean.
g) Use power tools, accessories, add-
5) Appropriate handling and use of
a) Make sure that the device has been
b) Only use charging devices recom-
c) Only use batteries designed for your
d) Keep unused batteries clear of paper
4
tool. Check whether moving parts
are working properly and are not
jamming/sticking, and whether parts
are broken or otherwise damaged in
a way that affects the function of the
tool. Have damaged parts repaired
before using the tool. Many accidents
are the result of poorly maintained pow-
er tools.
Thoroughly looked-after cutting tools
with sharp cutting edges are jamming
less often and are easier to guide.
on tools, etc. in accordance with
these instructions and in the way
prescribed for the respective type of
tool. You should also consider the
working conditions and the work to
be carried out. The use of power tools
for purposes other than those intended
for the respective tool may result in
dangerous situations.
battery-operated power tools
switched off before inserting the bat-
tery. Inserting a battery into a switched-
on power tool may lead to accidents!
mended by the manufacturer to
charge the batteries. Charging units
are usually designed for certain types of
batteries; if used with other types there
is a risk of fire!
power tool. The use of other batteries
may lead to injury and risk of fire!
clips, coins, keys, nails, screws or
other small metal objects that may
bridge the contacts. A short circuit
between the battery contacts may lead
to burns or fire!