Herunterladen Diese Seite drucken

Berner 61355 Bedienungsanleitung/Sicherheitshinweise Seite 25

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Connect the saw to a dust collection device when
sawing wood. Always consider factors which infl u-
ence exposure of dust such as:
-
Type of material to be machined (chip board
produces more dust than wood);
-
Correct adjustment of the saw blade;
-
Ensure that the local extraction as well as hoods,
baffl es and chutes are properly adjusted.
Operator shall be instructed on factors infl uencing
exposure to noise (e.g., use of saw blade designed
to reduce the emitted noise, saw blade and machine
maintenance);
-
Report faults in the machine, including guards
or saw blade, as soon as they are discovered;
-
Provide adequate general or localized lighting;
-
Ensure the operator is adequately trained
in the use, adjustment and operation of the
machine;
-
When fi tted with laser, no exchange with differ-
ent type of laser permitted. Repairs shall only
be carried out by the laser manufacturer or an
authorized agent.
Residual risks
The following risks are inherent to the use of saws:
-
injuries caused by touching the rotating parts
In spite of the application of the relevant safety regulations
and the implementation of safety devices, certain residual
risks cannot be avoided. These are:
-
Impairment of hearing.
-
Risk of accidents caused by the uncovered parts of
the rotating saw blade.
-
Risk of injury when changing the blade.
-
Risk of squeezing fingers when opening the
guards.
-
Health hazards caused by breathing dust developed
when sawing wood, especially oak, beech and
MDF.
Package contents
The package contains:
1
Partly assembled machine
2
Allen key 4/6 mm
1
216 mm TCT saw blade
2
Dust extraction nozzles
1
Dust bag
1
Instruction manual
1
Exploded drawing
Check for damage to the tool, parts or accessories
which may have occurred during transport.
Take the time to thoroughly read and understand this
manual prior to operation.
Description (fi g. 1, 2, 9)
WARNING: Never modify the power tool or
any part of it. Damage or personal injury could
result.
INTENDED USE
Your cross-cut mitre saw has been designed for profes-
sional cutting of wood, wood products and plastics. It will
perform the sawing operations of cross-cutting, bevelling
and mitring easily, accurately and safely.
DO NOT use under wet conditions or in presence of fl am-
mable liquids or gases.
This cross-cut mitre saw is a professional power tool.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators
use this tool.
a.
On/off switch
b.
Guard lock up release lever
c.
Carrying handle
d.
Fixed upper guard
e.
Outer fl ange
f.
Blade bolt
g.
Lower blade guard
h.
Saw blade
i.
Sliding fence lock knob
j.
Fixed table
k.
kerf plate
l.
Mitre arm
m. Mitre latch
n.
Rotating table/mitre arm
o.
Mitre scale
p.
Sliding fence
q.
Dust extraction nozzle
r.
Traverse lock
s.
Guard lock up hook
t.
Bevel clamp handle
u.
Bevel scale
v.
Bench mounting holes
w. Lock down button
x.
Traverse bars
y.
Saw head
z.
Allen keys
aa. Cable clamp
bb. Cable
cc. Padlock hole
dd. Override button
ee. Carrying handle (left and right)
ff.
Inner fl ange
OPTIONAL ACCESSORITES (FIG. 3-6)
gg. Table end plate
hh. Support guide rails
ii.
Material support plate
24

Werbung

loading

Diese Anleitung auch für:

Bms - 77788610