Werbung
Verfügbare Sprachen
Verfügbare Sprachen
BMS-777 CROSS-CUT MITRE SAW
Congratulations!
You have chosen a Berner tool. Years of experience,
thorough product development and innovation make
Berner one of the most reliable partners for professional
power tool users.
Technical data
Voltage
(U.K. & Ireland only)
Power input
Blade diameter
Blade bore
Max. blade speed
Mitre (max. positions)
Bevel (max. positions)
Compound mitre
Capacities
cross-cut 90°
mitre 45°
mitre 48°
bevel 45°
bevel 48°
Overall dimensions
Weight
L
(sound pressure)
pA
K
(sound pressure
pA
uncertainty)
L
(acoustic power)
WA
K
(acoustic power
WA
uncertainty)
Vibration total values (triax vector sum) determined
according to EN61029:
Vibration emission value a
a
=
h
Uncertainty K =
Notifi ed body, delivering the certifi cate
TÜV Rheinland Product and Safety
GmbH (TRPS)
Am Grauen Stein 1
D-51105 Köln, Germany
BMS-777
V 230
V 230/115
W 1800/1600
mm 216
mm 30
-1
min
6300
left and right 50°
left 48°
bevel 45°
mitre 45°
mm 60 x 270
mm 60 x 190
mm 60 x 180
mm 48 x 270
mm 45 x 270
cm 460 x 560 x 430
kg 14.0
dB(A) 93
dB(A) 3
dB(A) 104
dB(A) 3.9
h
2
m/s
1.7
2
m/s
1.5
Fuses
Europe
230 V tools 10 Amperes, mains
U.K. & Ireland
230 V tools 13 Amperes, in plugs
U.K. & Ireland
115 V tools 16 Amperes, mains
The vibration emission level given in this information sheet
has been measured in accordance with a standardised
test given in EN 61029 and may be used to compare
one tool with another. It may be used for a preliminary
assessment of exposure.
WARNING: The declared vibration emission
level represents the main applications of the
tool. However if the tool is used for different ap-
plications, with different accessories or poorly
maintained, the vibration emission may differ.
This may signifi cantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibra-
tion should also take into account the times
when the tool is switched off or when it is run-
ning but not actually doing the job. This may
signifi cantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the
operator from the effects of vibration such as:
maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.
Defi nitions: Safety Guidelines
The defi nitions below describe the level of severity for each
signal word. Please read the manual and pay attention
to these symbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in
death or serious injury.
WARNING: Indicates a potentially hazardous
situation which, if not avoided, could result in
death or serious injury.
CAUTION: Indicates a potentially hazardous
situation which, if not avoided, may result in
minor or moderate injury.
CAUTION: Used without the safety alert symbol
indicates a potentially hazardous situation
which, if not avoided, may result in property
damage.
Denotes risk of electric shock.
21
E N G L I S H
Werbung
