STIEBEL ELTRON LWZ 130 Bedienung Und Installation Seite 50

INSTALLATION
Installation
Transport
9.3
Property damage
If possible, transport the appliance to the installation Io-
cation in its original packaging.
If the appliance is transported without packaging and
without using a pallet, e.g. to carry it up or down stairs,
its outer casing may be damaged.
To transport the appliance without
move the front panel of the appliance. See chapter "In-
stallation / Removing the front panel".
Property damage
Never use the air connections as handles for carrying
the appliance.
Installation
10.
WARNING Electrocution
Do not install the appliance if it is damaged and there is
a risk that live components could be touched.
Checkthe appliance for external damage.
Property damage
Make sure that there are no sharp objects at the in-
stallation location that could drill through the outer
envelope of the appliance.
Mounting the appliance
10.1
LWZ 130 LWZ 130 Enthalpie
Installation below the ceiling x
Wall mounted installation
Property damage
Checkwhether the ceiling or wall can bear the
weight of the appliance.
Property damage
Never install the unit at an angle.
• Notice
The filter cassettes are located at the bottom of the ap-
pliance.
Notice
Install the appliance before mounting the ceiling panels
of the suspended ceiling.
Notice
When positioning the appliance, ensure there is
sufficient space to install the supply and extract air
ducts (see chapter "Preparations / Installation site /
Minimum clearances").
Drill holes in the ceiling or wall for mounting the appliance
with threaded pins or hanger bolts.
50 | LWZ 130 | LWZ 130 Enthalpie
packaging, first re-
LWZ 130 E-W
x x
x
I I-WZ 130 E-W
Fit the following parts onto each threaded pin in the se-
quence described.
Installation below the ceiling
Nut
1
Washer
2
Anti-vibration mount
3
Appliance mounting
4
Anti-vibration mount
5
Washer
6
Nut
7
Nut (Lock nut)
8
Wall mounted installation
Anti-vibration mount
1
Appliance mounting
2
Anti-vibration mount
3
Washer
4
5 Nut
Nut (Lock nut)
6
Aligning the appliance
Use a spirit level to check that the appliance is straight.
Level the appliance horizontally by turning the nuts.
1
2
3
4
5
6
7
8
1 2 3 4 5 6
www.stiebel-eltron.com