STIEBEL ELTRON LWZ 130 Bedienung Und Installation Seite 43

OPERATION
Settings
4.4.3 "Programs" menu
Programs
Fan program
Programs
O • Fan program
• Notice
For times where there is no fan program defined, the unit
operates at fan stage 2.
You cannot switch on fan stage 3 with fan programs.
For the fan programs, you can specify a fan setting, time, day of
week or time block.
Setting switching time pairs
You can set three switching time pairs for each day of the week
or time block. The switching time pairs are shown on the display,
to the right of the clock.
Eachswitching time pair consists of a start time and an end time.
After a switching time pair has expired, the unit switches to "Stage
2" operating mode.
Periods around midnight
Switching time pairs can be programmed only up to 24:00. If you
want to choose periods that extend beyond midnight, you will
needto set an additional switching time pair for the following day.
In the "Programs" menu, select "Fan program" using the
Touch-Wheel. Press "0K".
Select a day of the week or a time block. Press"0K".
Select one of the three switching time pairs. Press"0K".
Select "Stage". Press"0K".
Select the fan setting. Press"0K".
Select "Start". Press "0K".
Set the start time. Press "0K".
Select "End". Press "0K".
Set the end time. Press "0K".
The fan program is now set.
In standard view, select "Time program mode". Press"0K" to
activate the fan program.
• Notice
If there are fan programs with identical times, the higher
levelswitching time pairs and individual days of the week
have priority.
www.stiebel-eltron.com
Example
Value
Monday Monday to Friday
Tuesday
Wednesday
Saturday. Sunday
Thursday
Friday
Saturday
Sunday
Fan program
Monday- Friday
Day of the week or time
Saturday - Sunday
block
Monday - Sunday
Monday- Friday
Monday- Friday
Saturday - Sunday
Saturday- Sunday
Fortimes where there is no fan program defined, the unit operates
at fan stage 2.
Deleting switching time pairs
Resetting one of the times to
time of the switching time pair.
Deleting day of the week or time block
4.4.4 "Settings" menu
u Settings
C]'
C]CJ•
C]Cj• Language
CID'
C]C]• Brightness
C]D• Touchsensitivity
C]D7
C]LJ• Pros.unit software
C]D•
Switching
06:co - 22:00
22:co - 06:00
07:00 - 23:00
23:cc - 07:00
Stage
1
1
1
1
To delete a switching time pair, select the "Start" or "End" of
a switching time pair.
Turn the Touch-Wheel to the left beyond 00:00 until dashes
" are displayed. Press"0K".
Delete all three switching time pairs to delete the fan pro-
gram for the weekday or time block.
View
General
Time/date
Contrast
Touch boost
Air flow rate
Favourites
Horn;ciity prot.
Intensive ventilation
Intens. vent. time
LWZ 130 | 130 Enthalpie
time pairs Stage
2
1
2
End
Start
22:00 24:00
00:00 06:00
23:00 24:00
00:00 07:00
automatically resets the other
Value
Code for qualified contractor
Day
Hour:Minute
Deutsch
Englis
Francms
Nederlan s
Italiano
Cesky
Ma ar
Slovens o
Slovens
1-10
1-10
1-10
Onlyfor qualified contractors
Bypassstatus
Extract air tern
Extract air um.
ter runtime
Device software versi on
Device software patch
Mobile device serial no.
Onlyfor qualified contractors
min
I LWZ 130 E-W I 43