Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Troubleshooting
The following table will assist you in fixing faults:
Problem
Machine does not start
Machine works with interrup-
tions
Poor sawing performance
Saw blade quickly becomes
blunt
Disposal/
environmental
protection
Remove the battery from the device and re-
cycle the device, battery, accessories and
packaging in an environmentally-friendly man-
ner.
Possible cause
Rechargeable battery (16) not
inserted
On/Off switch (4) is broken
Defective motor
Rechargeable battery (16) dis-
charged
Internal loose contact
On/Off switch (4) is broken
Saw blade (21/20) unsuitable
for the workpiece to be pro-
cessed
Saw blade (21/20) blunt
Incorrect sawing speed
Low battery power
Saw blade (21/20) unsuitable
for the workpiece to be pro-
cessed
Too much pressure applied
Sawing speed too high
• Directive 2012/19/EU applies to this
• Take the device to a recycling plant. The
Error correction
Inserting the batteries, p.
28
contact the service centre.
contact the service centre.
Charge the battery (see the sep-
arate operating instructions for
the rechargeable battery and
charger)
contact the service centre.
contact the service centre.
Insert a suitable saw blade (21/
20)
Insert a new saw blade (21/
20)
Adjust sawing speed
Charge the battery (see the sep-
arate operating instructions for
the rechargeable battery and
charger)
Insert a suitable saw blade (21/
20)
Reduce the pressure
Reduce the sawing speed
Electrical devices must not be disposed
of with domestic waste.
Do not throw batteries into domestic
waste, fire (risk of explosion) or water.
Damaged batteries can harm the envir-
onment and your health if poisonous
fumes or liquids escape.
device.
plastic and metal parts used on your device
can be properly sorted according to ma-
terials and grades and efficiently recycled.
GB
MT
31
Werbung
