Werbung
Verfügbare Sprachen
Verfügbare Sprachen
✔ The device page will be displayed.
4. If not, press the following row: Device info
PPSSA 40-Li A1
✔ The device page will be displayed.
If you cannot select the device on the smart
battery page, make sure you have selected
the correct smart battery and that the smart
battery is correctly inserted into the device.
Data and functions
• Illustration of the device: Print Illus-
tration shows interactive 3D view of the
device.
• Tool Virtual ID: Unique ID of the device
• Tool model: Model name of the device
• Tool discharge current: Present current
in amperes
• Tool rotation speed: Set maximum
speed
Press row (Tools work mode: Expert) ⭢ Set
maximum speed; 32% (960 RPM) –100%
(3000 RPM)
• Current Level: Set level (Level 1:
0–2300 RPM; Level 2: 0–3000 RPM).
• Tools work mode: Working mode
Press row ⭢ Select working mode
• Per f o r man c e Select the preset
level with the switch or the app (Current
Level)
• E xp er t Set maximum speed with the
app (Tool rotation speed)
• lamp switch: Switch LED work lights on
and off.
• Tool light brightness: Brightness of the
LED work lights.
Press row ⭢ Adjust the brightness: 1 –
100% (factory setting: 100%).
• Tool light delay off setting: Delay
with which the LED work lights remain lit
after they are switched off.
Press row ⭢ Set delay: 0 – 99 s (factory
setting: 10 s)
• Tool total runtime: Total runtime of the
device
• Tool over temperature times: Num-
ber of overtemperature shutdowns of the
device.
• Tool locked times: Number of times the
device has been blocked.
• Tool overcurrent times: Number of
times the device has been overloaded.
• Firmware Version: Current firmware
version. A red dot indicates that an update
is available. Press the row for an update.
Follow the instructions in the app.
• Reset to factory: To reset the device to
factory settings, press the following button:
R E SE T
Follow the instructions in the app.
Smart-battery – Data and
functions
Brief overview (above)
Swiping sideways shows the following informa-
tion:
• Standard: Basic information and illustration
(Pressing shows interactive 3D view of the
device.)
• Temperature (black line); red line: Threshold
to overheating
• Charging current
• Discharge current
• Battery power
Further data and functions
• Lock battery (Security switch) ❯ Set PIN to
lock battery
• Battery work mode
Profiles for the following parameters: Low
discharge voltage, Discharge current limit
• Specified profiles Balance, ECO, Per-
formance
• Expert
❯ Manual adjustment of parameters pos-
sible
• PUSH-Notifications
(De)activate notifications for important
events
• Overheated
• Battery identifier: Activate charge level in-
dicators of the connected battery for a short
time
• °F/°C Switch ❯ Select unit of temperature
GB
MT
29
Werbung
