7. The SD Card Slot accepts Micro SD cards up to 512GB in FAT32 format, class 10.
8. The Power (
recording, a short press enters event recording mode, and pictures can be taken
with a short press.
9. The Mount Port connects to a Type C cable or car charger for power supply.
10. The Front Camera is used for recording the road ahead.
11. The Mount Interface is where you connect the device to its mount.
12. The Power Port allows connection to a Type C cable or car charger for power, as well
as data transfer when connected to a data cable.
13. The Reset Button is used to force a reset of the device if necessary.
14. The Screen is a 1.54" IPS display that provides visual feedback and interaction.
15. The LED indicator shows a steady green light when the device is in standby mode,
and it blinks green when the camera is recording.
Screen Overview
Video Resolution
No memory card inserted
Memory card inserted
Loop recording OFF
Loop recording for 1 min.
Loop recording for 3 mins.
Loop recording for 5 mins.
Parking Mode
Recording Time
(Current Session)
) Button powers the dash cam on or off with a long press. During
G-Sensor OFF
G-Sensor ON
Mic is ON
Mic is OFF
HDR is ON
HDR is OFF
Current Date and
Time
Connecting to GPS
Connected
Voice Assistant
Wi-Fi is ON
Wi-Fi is connected
Wi-Fi is OFF
Remote control is connected
Current speed (Either in
KMH or MPH
Icons for indicating buttons
Time lapse is ON
Collision detection is ON
Motion detection is ON
1080P / 15 FPS Low bitrates recording is ON
720P / 15 FPS Low bitrates recording is ON
Low framerate parking mode is ON
6